Introduction of PC5I Rotor Wet Concrete Shotcrete Machine
PC5I Rotor Wet Concrete Shotcrete Machine is mainly used in iron
(public) road tunnel project. Equipment is easy to operate, low
dust, low rebound, protect the environment and improve the quality
of shotcrete, a special vibration hopper can successfully enter the
concrete batching system.
Feature of PC5I Wet Concrete Spraying Machine
1. Through type rotary, non-sticky, unobstructed discharge, high
efficiency and time-saving.
2. Four-point clamping device makes it easy to adjust the press
between sealing plate and rotor disk so as to reduce air and dust
leak and prolong consumption parts life.,
3. PC5I Wet Shotcrete Machine using low-tension, high-speed vortex
pneumatic transportation, so the spraying flow is even, continuous
and steady. It's good to improve the shotcrete quality.
4. The new nozzle, discharge elbow device, improving spray
deposition effect, less resilient, high quality shotcrete.
Technical Parameter of PC5I Rotor Wet Concrete Shotcrete Machine
|Model||PC5I Rotor Wet Concrete Shotcrete Machine|
|Conveying dist. max.||100/30m|
|Suitable mixture ratio||cement/sand and gravel=1:3~5|
|Suitable water and cement ratio||>0.20|
|Aggregate size max.||φ20mm|
|Conveying pipe ID.||φ51mm|
|Air consumption||8 m3/min|
|Material feeding height||1.1m|
|Rotor rotation speed||11r/min|
|Motor rotation rate||960r/min|
|Voltage||380v or 660v|
|Machine gauge||600mm (customized)|